AirRise Wall Charger

The AirRise Wall Charger keeps AirRise ceiling hoists ready for the next transfer. Simply place the hand control on the wall-mounted charger and the hoist batteries charge automatically, with a green LED confirming charging. Available with an internal (5264) or external (5265) medically certified power supply.

Our Method

Keeping your ceiling hoist ready for every transfer

A ceiling hoist is only as reliable as its battery. The AirRise Wall Charger gives staff a simple routine: after each transfer, the hand control goes back on the charger and the hoist charges automatically. A green LED confirms it is charging, reducing the risk of a hoist running low mid-shift.

The charger uses a medically certified power supply, is protected against reversed polarity and short circuit, and has gold-plated contact pins rated for at least 10,000 cycles.

Innova specifies and positions the wall charger as part of every AirRise ceiling hoist installation, so charging points are planned into the room layout alongside the track, hoist unit and servicing from day one.

Key Features

Charges Through the Hand Control

Place the hand control on the wall charger and the AirRise ceiling hoist batteries charge automatically, with no cables to connect.

Green LED Charging Indicator

A green LED on the hand control confirms charging, so staff can see at a glance that the hoist is ready.

Medically Certified Power Supply

Uses a medically certified Mascot 2240 power supply for safe use in care and healthcare settings.

Internal or External PSU Options

Choose the 5264 with an internal power supply for a tidy finish, or the 5265 with an external power supply.

Wide Input Voltage

Accepts 90 to 264 V AC at 50 to 60 Hz for flexible installation.

Built-In Electrical Protection

Protected against reversed polarity and short circuit.

Durable Gold-Plated Contacts

Gold-plated brass contact pins are rated for a minimum of 10,000 charging cycles and are IPX5 water resistant.

Flame-Retardant Housing

ABS housing meets UL 94 V-0 flammability standards, finished in RAL 7035 light grey.

Learn More

Frequently Asked Questions

It charges the batteries of an AirRise ceiling hoist. When the hand control is placed on the wall charger, the hoist charges automatically, so it is ready for the next transfer.

A green LED on the hand control lights up to confirm the hoist is charging.

The 5264 has an internal power supply unit built into the charger. The 5265 uses an external power supply unit. Both use a medically certified Mascot 2240 power supply.

It is wall-mounted near a power outlet, usually in a convenient spot close to where the hoist is parked. Innova plans its position as part of the ceiling hoist installation.

The charger is rated IP52 when installed and its contact pins are IPX5 rated. Innova will advise on the best position within wet or hygiene areas so it stays clear of direct water.

The wall charger is designed for AirRise ceiling hoist units, including the AirRise200, AirRise275, AirRise350 and AirRise500.

It accepts 90 to 264 V AC at 50 to 60 Hz.

Yes. Innova designs, installs and services complete AirRise ceiling hoist systems, including the track, hoist unit, wall charger and ongoing maintenance, all through one coordinated partner.