Interlude V3 Bed
The Interlude V3 bed has been designed for busy and demanding hospital wards and clinics. It has a modern design with a compass elevation system by linear actuators, that provides greater stability to the bed.
Electrically powered to make all the necessary adjustments for both the patient and carer, this bed is easy and simple to use, ensuring optimum patient welfare and comfortability.
- Linear actuators with IP66 protection.
- HPL hand removable bed base divided in 4 sections.
- Extensible bed base, up to 30 cm.
- 4 safety bumpers on each corner
- X-Ray transparent backrest section
- Centralized braking system by a braking bar located in the footboard area.
- Lighter and easy driving bed.
- It has an easy to remove headboard and footboard with blockage system, using only one hand.
- New pre-programmed positions to ensure the patient welfare (safe exit, 30º backrest, etc).
- Double regression system, it reduces the pressure in the pelvic area, way to decrease the pressure ulcers risk (165 mm).
- Polypropylene made side rails with grip zone and folding system by gas spring. All to facilitate sitting up and getting out the bed.
Specifications | |
|---|---|
Maximum length with footboard and headboard | 2220 mm. ± 10 mm |
Total width with side rails | 1010 mm. ± 10 mm |
Min./ Max. height of bed base (without mattress) | 425 mm. / 840 mm. ± 10 mm |
Length of bed extension | 300 mm |
Backrest max. angle | 70º ± 5º |
Leg Rest max. angle | 47º ± 2º |
Trend / Reverse trend angle | 13º / 14º ± 2º |
Safe Working Load (SWL) | 265 kg |
Want to find out more?
When you complete the form, this is what happens next:
- An automated email is sent to our Enquiries email address at Innova
- This email is then picked up by the Innova team
- The team responded to you typically within 24 hours during working days
- We do not sell your data to any third party
Share this page
Facebook
Twitter
LinkedIn
Email
WhatsApp